|
|||
 |
|||
|
The LP-SPL3825W is an all weather 3-way RF splitter that enables you to divide the incoming RF power equally among three outputs in such way that the signal can be bilaterally carried up to three antennas or terminal devices. It is optimized for maximum performance in the 2.4 GHz band. No power supply is required for operation of our units. They are passive units with low insertion losses. The LP-SPL3825W is suitable for the 800 MHz to 2500 MHz segment of the RF spectrum that includes the 2.4 GHz Wi-Fi band (IEEE 802.11 b/g). Our splitters are hermetic and built with corrosion proof materials, enabling its usage in all weather outdoor environments. Nominal impedance is 50 Ohm, as expected on this kind of equipment. In either case, the use of self-vulcanizing 3M electrical tape (also called rubber tape or friction tape) is a must to protect the unit against humidity, dust, and small particles that could corrode the unit. Based on a microstrip structure, it has low pass-band ripple, high isolation, low insertion loss, and low VSWR. |
|||
| FEATURES |
* Works equally well for both transmit and receive signals (bilateral). * Typical connector: N-Female. Strong aluminum all weather case. * Easy to mount. * Only 0.6 dB insertion loss over the theoretical 3.5 dB loss found in 3-port splitters in 2.4 GHz. * Temperature: -30 to +60 °C. * Covers the entire 2.4 GHz band. * VSWR: 1.4 or less in any frequency. * Microstrip structure, low pass-band ripple, high isolation, low insertion loss. * Low VSWR. * Suitable for outdoor cellular mobile or fixed communication and spread spectrum Wi-Fi systems. |
||
| HOW TO ORDER | LP-SPL3825W 0.8 - 2.5 GHz 3-Way N-Female Outdoor RF Splitter. | ||
