|
|||
 |
|||
|
NYX Near-LOS Single Band Mesh Bridge Series by LanPro® enable our customers to implement the wireless Mesh architecture based on the IEEE 802.11s standard, providing high bandwidth wireless networking over a selected coverage area. Equipment are deployed as network routers. It is built with peer to peer radios that do not need to be wired as conventional AP’s in a WLAN. Coverage provided by the Mesh architecture enables uniform wireless signal levels, by dividing long hops into shorter distances. Nodes cooperate by using smart forwarding routing software and perform as signal boosters for coverage. These technologies provide high bandwidth, efficient spectrum utilization and better economics.
The wireless node can self-configure, dispose the network, and the network failures can be repaired automatically so that the overall performance and the usability achieves the optimization. This equipment makes use of advance software to enhance the throughput and low time-out from the centre to the edge of the network. It provides the wireless broadcast access and the high bandwidth audio/data/video service.
This outdoor Mesh bridge provides customers with the greatest flexibility to deploy applications due to customers need and would be easily upgraded or switched to another interface with the lowest cost.
This radio incorporates Time Division Duplex (TDD) technology that can be operated on a single channel. The Ethernet products are primarily designed to provide standard Ethernet interface in a wireless link between distant sites.
Available in 300 MHz to 6.0 GHz by customization and in the standard bands 400 MHz, 900 MHz, 2.4 GHz and 5 GHz. |
|||
| FEATURES |
* Effective spectrum utilization.
* Technique operating in currently available models in the following bands: 900 MHz, 2.4 MHz and 5 GHz, for customized frequencies in the 300 MHz to 6 GHz band, a longer lead time is needed for evaluation.
* Long range and Near-LOS nodes connection.
* With a data rate up to 5.5 Mbps / 10 Mbps / 20 Mbps (with different software selectable bandwidths of: 5 MHz / 10 MHz / 20 MHz), the system is much faster than an E1/T1 data link. Customer can select the suitable bandwidth via the software.
* All wireless nodes auto-discover and self-configure.
* Self-tuning and self-healing mesh for network optimization.
* High throughput performance and low time-out.
* Supports QoS (WMM) / Multi-BSSID/VLA, the Wi-Fi Multimedia (WMM) based on the 802.11e interoperability certification standard by the Wi-Fi Alliance to prioritize the real time voice, video, and data applications.
* Up to 8 sets SSIDs for VLAN application.
* Multiple security settings per VLAN with up to 8 VLANs. Security settings for multiple groups; so employees, guests and contractors now easily and securely share the same infrastructure.
* VAPs (VLAN) (Virtual Access Point). Assign Multi-SSIDs on your radio (one SSID per VAP) to differentiate policies and services among users forming a wide variety of VLANs.
* Transmit Power Control. Supports settable transmit power levels to adjust coverage cell size, ranging from full, half(50%), quarter(25%) eighth(12.5%) and minimum.
* Mesh protocol only supports WEP 64 / 128 / 256 bit encryption. Access point mode supports all security protocols: WPA-PSK and WPA2(AES) as well as MAC access control to increase security.
* Provides Web-based configuration utility, user friendly interface.
* Antenna Alignment. The site survey and link test function provides the RSSI (signal strength) info to indicate the status of antenna alignment.
* When using 2.4 or 5 GHz, @200 mW with external Omni antenna version @ 12 dBi, NYX radios deliver Node to Node @ 1.3 km about 20 Mbps capacity (single node to node, is similar with PTP but using Omni antenna in each site) Each node @ 1km and under multi-nodes environment delivers 10-20 Mbps capacity.
* IP-68 rated weatherproof housing.
|
||
| HOW TO ORDER | LP-NYX0404A1 400 MHz band 33 dBm @ QAM-16 Non-LOS Wireless Mesh Radio, 24 VDC. | ||
