|
|||
 |
|||
|
The 7000 Series wall cabinets follow our tradition of strenght and robustness which characterizes this series. They are sturdy and resistant, made of a special thick steel sheet for withstanding years of use and abuse. These 7000 Series WallRacks are composed of a frame, side panels and doors. Come packaged in three(3) boxes. These cabinets are mostly used tipically in small installations where there is a mix of cabling, Switches, Routers and other active equipment made for Rack mounting or not. 7000 Series WallRacks come with Fan Trays included in order to facilitate the installation and mounting time of the product to the system's integrator. These fan trays enhance the thermal management of the units and use high quality Fans with ball bearings for a 50.000 hour MTBF long lifespan. Note: If you require a small server cabinet for a SOHO application, we recommend the standup version with casters of 18U. It lets you install a small server and some cabling at low cost and with reliability. |
|||
| FEATURES |
* Cable Management: LanPro WallRack (WR) is provided with two cable entry points on the top and bottom of the enclosure. Plastic snap in panels cover these slot and can be conveniently removed. For additional security, these panels can be replaced by a metal plate secured from the inside of the cabinet. The large opening normally used for fan trays or filler panels can also be used for cable entry. * Thermal Management: Wall boxes do not normally have the component density which generates excess heat. Nevertheless, we have provided ventilation slots on the side panels and left an opening on the top of the enclosure. This opening can be covered with a blank panel, vented panel or a fan tray. * Strength: Our WallRack (WR) will support loads up to 60kg. Load will vary depending on your specific wall construction. LanPro tests are conducted with a cinder block wall. * Fan included. * Installation: Our basic wallbox mounts directly to the wall via four removable brackets. For models 6U through 15U, there is a single 19” mounting rail built into the front frame. Our 18U model requires more support and comes standard with the second rear frame. * High SPCC grade sheet steel. * Phosphate primer and electrostatic powder painted for scratch resistance. * Basic color is black. They can be produced in several depths and colors under special order. * Standards: ANSI/EIA RS-310- D, IEC297-2, DIN41491 part I, DIN41494 part 7, GB/T347 as of 2-92. * Grounding post in the plinth. * 4 wall mounting holes on the internal back frame (LP-R702XX) or external back frame (LP-R701XX). |
||
| HOW TO ORDER | LP-R70106609 Rack, WallRack 7000 Series, Width: 600 mm, Box Depth: 500 mm, Wall Frame: 100 mm, Total Depth: 600 mm, Height: 9 U | ||
