The SFP transceiver supports dual data-rate of 1.25 Gbps/1.0625 Gbps and from 120 km transmission distance with SMF or 550m with MMF.
 

The transceiver consists of two sections: The transmitter section incorporates a 1550 nm DFB laser. The receiver section consists of an APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver.
 

The standard serial ID information compatible with SFP MSA and SFF-8472 describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA).
 

These modules are compatible with SONET OC-24-LR-1 and come with the DDM (Digital Diagnostic Monitoring) feature included in the functionality.

* Operation Data-rate of 1.25 Gbps.

* 1550 nm DFB laser and PIN photodetector for 80 km transmission.

* Compliant with SFP MSA and SFF-8472 with duplex LC receptacle.

* Hot Plugable.

* Digital Diagnostic Monitoring:

Internal Calibration or External Calibration.

* Compatible with SONET OC-24-LR-1.

* Compatible with RoHS.


Applications:
 

* Gigabit Ethernet.

* Fiber Channel.

* Switch to Switch interface. 

* Switched backplane applications.

* Router/Server interface.

* Other optical transmission systems.