|
|||
 |
|||
|
The SFP transceiver supports dual data-rate of 1.25Gbps/1.0625 Gbps and from 80 km transmission distance with SMF or 550m with MMF.
The transceiver consists of two sections: The transmitter section incorporates a 1550 nm DFB laser. The receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).
All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA).
|
|||
| FEATURES |
* SFP package with LC connector.
* 1550 nm DFB laser and PIN photo detector.
* 550 m transmission with MMF.
* 80 km transmission with SMF.
* +3.3V single power supply.
* LVPECL compatible data input/output interface.
* Low EMI and excellent ESD protection.
* Laser safety standard IEC-60825 compliant.
* Compatible with RoHS.
* Hot-pluggable SFP footprint. Applications:
* Ethernet.
* Telecom.
|
||
| HOW TO ORDER | LP-OSFPZX01 SFP Optical Transceiver module, LC Duplex, 1.25 Gbps 1000 BASE-ZX, 1550 nm, Single MODE (9/125 μm), up to 80 Km or Multimode 50/125 μm/62.5/125 μm up to 550 m. | ||
