|
|||
The LP-SGP801 8-Port Gigabit PoE Ethernet Switch is a highperformance 10/100/1000 Mbps Gigabit PoE switch with up to seven PoE active ports and one Gigabit up-link port active. Each of the PoE ports can deliver up to 15.4W per port but the user must limit the total PoE outputs active to seven (7) in order to limit the total power rating to 112 W. This 112 W limit results from subtracting the 8 W normally consumed by the internal circuit of the PoE switch from the 48 VDC 2.5A power adaptor maximum of 120 W. In real installations, loads are lower than 15.4 W and the LP-SGP801 could power all of them if the 112 W total is enforced. This product is an ideal solution for small office and home users to utilize a combination of Gigabit PoE and non-PoE devices. The switch automatically detects IEEE 802.3af compliant devices and provides power and data over a single cable. |
|||
FEATURES |
* 8 x 10/100/1000Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 ports. * Built-in 8 PoE port. ( Port 1 ~ Port 8). * Supports PoE power maximum 15.4 watts for each PoE port. * Loading limit is seven (7) loaded PoE ports and one for uplink or for a not PoE loading device. * Supports POE Power Devices (PD). * Store and Forward Switching Method. * Built-in 2K entries MAC Address table/ 4K VLANs / 9216-byte jumbo packet length. * IEEE 802.3x Flow Control for Full-Duplex: Back Pressure Flow Control for Half-Duplex Mode. * Supports 802.1Q VLAN, port-based IEEE 802.1p QoS. * Supports IVL, SVL and IVL/SVL. * Store & forward, shared memory, nonblocking architecture. * No Special Networking Cable Required. * Plug and Play. * The LP-SGP801 is a power source equipment (PSE) that complies with the IEEE 802.3af power over ethernet (PoE) standard. |
||
HOW TO ORDER | LP-SGP801 8 PoE port 10/100/1000 Ethernet Gigabit Switch. | ||