Technologies

 

Industrial UHF/SHF

 

 
* The ATLAS SERIES of radios belong to our family of NLOS (Near Line of Sight) products that allow the operator to economically make the most of the ISM and licensed bands by coupling proven 802.11 technology with state of the art RF amplifiers and efficient antenna systems. Our ATLAS SERIES provide the operator with all the advantages of NGN (New Generation Networking) transmission (OFDM, NLOS, efficient band utilization etc.) without a large capital investment. The initial cost of ownership for an operator growing into a new service area is immediately affordable. The ATLAS SERIES operate in the unlicensed 900 MHz ISM band (902 - 928 MHz) as well as many other licensed ones. The combination of NLOS from OFDM and 802.11 chipsets make this the most cost effective solution on the market for that band. Software selectable channel bandwidths of 5, 10 and 20 MHz give 5.5, 10, and 20 Mbps throughput respectively. LanPro offers complete support for the deployment of solutions based on this technology. This series of radios have high RF power and coverage and is an excellent choice for SCADA applications. It is protocol transparent. Available with internal or external antenna when greater gain or directiveness is needed. The picture shown here is a salt mine in Australia.
 
* The VULCAN SERIES from Lanpro is a high capacity PtP/PtmP backhaul for long distance solution. The series operate in 400 MHz/900 MHz, 2.3 GHz/4.9 GHz licensed band and 2.4 GHz/5 GHz ISM band for wireless deployment in long distance. Comes in versions with or without integrated antenna. 5/10/20/40 MHz adjustable channel bandwidth provides the flexibility of deployment in channel plan or high capacity backhaul, and variable capacities for different applications - the highest truly accumulated throughput (uplink plus downlink) is up to 50 Mbps.
The series utilizes TDD (TDMA) technology which allowing the balanced uplink and downlink tunnels on a single channel. This radio is primarily designed to provide standard Ethernet interface in a wireless link between distant sites. The VULCAN SERIES has powerful security management because it supports WEP and WPA2 (AES-128bits) encryption, and use the proprietary protocol. All these functions make the network much more secure and reliable.
 
* The VULCAN VSU (Vehicle Subscriber Unit) Series from LanPro provides LOS (Line of sight) and NLOS (Near/ Non-Line of sight) solutions for transmission of mobile video/data/voice applications. LOS solution includes 2.4 GHz/5.8 GHz ISM band, 5 GHz UNII band, 900 MHz/4.9 GHz Public Safety band, and some other frequencies like 2.3 GHz/2.5 GHz/3.3 GHz and 3.5 GHz. NLOS solution includes 300 MHz/400 MHz UHF band. The fractional bandwidth control feature allows more non-overlapping channels in practical deployment that provides better flexibility in deploying the network. High output power OFDM-TDMA technology gives the ability for near/non-line of sight deployment, and supports long distance and high capacity wireless mobile data solution. The LanPro VSU Series utilize Time Division Duplex Technology allowing operation on a single channel. The Ethernet products are primarily designed to provide standard Ethernet interface with robust aluminum alloy indoor unit.

 
 
 

Last Mile (Voice+Ethernet)

 

CONVERGENCE SERIES: Voice / Data / Video Multiplex Microwave System.

* This is a cost-effective solution that delivers up to 23 Mbps air rate for Ethernet and 4E1s (4T1s) traffic.
* The system supports a variety of spectrum bands.
* Available in FE1 (Fractional E1), V.35 and Ethernet interface version. Strictly PtP.
* The 2/4E1 model´s frequency available in 2.4 GHz and 5 GHz.
* The FE1/V.35 model´s frequency Available in 700 MHz, 900 MHz, 2.3 GHz, 2.4 GHz, 2.7 to 2.9 GHz, 3.3-3.7 GHz, 4.9 and 5 GHz.
* SNMP ready.
* 120/240 VAC and 48 VDC available.
* LOS mandatory. * Excellent CAPEX.
* Versions ready with or without integrated antenna.

 
 
 

Last Mile (Voice+Ethernet+V.35)

 

CONVERGENCE SERIES: Voice / Data / Video Multiplex Microwave System.

* This is a cost-effective solution that delivers up to 23 Mbps air rate for Ethernet and 4E1s (4T1s) traffic.
* The system supports a variety of spectrum bands.
* Available in FE1 (Fractional E1), V.35 and Ethernet interface version. Strictly PtP.
* The 2/4E1 model´s frequency available in 2.4 GHz and 5 GHz.
* The FE1/V.35 model´s fs frequency available in 700 MHz, 900 MHz, 2.3 GHz, 2.4 GHz, 2.7 to 2.9 GHz, 3.3-3.7 GHz, 4.9 and 5 GHz.
* SNMP ready.
* 120/240 VAC and 48 VDC available.
* LOS mandatory.
* Excellent CAPEX.
* Versions ready with or without integrated antenna.

 
 
 

Long Range High Capacity Outdoor Subscriber Radios

 

The VULCAN SERIES of radios from LanPro is high-powered and comes with or without the panel antenna-integrated design.

* Used mostly for high capacity point-to-point backhaul in the 900 MHz to 6.06 GHz bands (including ISM bands), for wireless deployment.
* Long distance operation in excess of 50km, ideal for deploying VoIP to rural and remote villages.
* 5/10/20/40 MHz adjustable channel bandwidth provides the flexibility of deployment channel plan.
* High capacity backhaul + truly total accumulated throughput (uplink + downlink) up to 56Mbps with 40MHz channel BW.
* Multiple session tunnels of up to 8 Mbps.
* OFDM - TDMA - TDD technology allows for operation of balanced uplink / downlink tunnels in a single channel with minimum collisions and the highest possible efficiency.
* The Ethernet products are primarily designed to provide standard Ethernet interface in a wireless link between distant sites.
* Usable as dedicated ISP connections for high-reliability subscribers or Enterprises and Institutions LAN and PBX extensions to high reliability subscribers.
* Powerful security management due to usage of a proprietary protocol and supports WEP, WPA2 (AES-128bits) encryption, and MAC address filter.

 
 
 

WI-FI - 2.4 GHz

 

In the wireless area, LanPro supplies Access Points (AP´s), with performance levels like those needed in an enterprise, to systems that provide service to small villages or campus, SBS and home solutions.

LanPro is also capable of supplying an extensive line of antennas for better area coverage, as well as RF devices and accessories or active equipment that provide benefits like bandwidth management with QoS and user authentication.

 
 
 

WI-FI - 5 - 6 GHz

 

Using advanced OFDM and RF power amplifier technology, LanPro Radios deliver high output power and amazing throughput even in long distance transmission.

They operate at the 5 GHz band (5.15, 5.25, 5.47 and 5.725).

 
 

Wireless Systems Catalog