|
|||
 |
|||
|
Model shown is a two-port antenna Splitter that enables you to operate one radio with two antennas. It is optimized for maximum performance in the 2.4 GHz band. No power supply is required for operation of our units. They are passive units with low insertion losses. LanPro provides 2:1, 3:1 and 4:1 splitters suitable for the 2.4 GHz band (802.11 b/g) as well as for the 5.8 GHz band (802.11a). Our splitters are hermetic and built with corrosion proof materials. Nominal impedance is 50 Ohm, as expected on this kind of equipment. We provide both, the indoor models as well as the outdoor all weather model. In either case, the use of vulcanized 3M electrical tape (also called rubber tape or friction tape) is a must to protect the unit against humidity, dust and small particles that could corrode the unit. |
|||
| FEATURES |
* Works equally well for both transmit and receive signals * Typical connector: N Female. * Strong aluminum case * Only 0.6 dB insertion loss over the theoretical 3 dB loss found in 2 port splitters in 2.4 GHz. * Temperature: -30 to +60 °C. * Covers the entire 2.4 GHz band (available in 5.8GHz) * VSWR: 1.4 or less in any frequency. * Available in both frequencies as well as 2:1 , 3:1 and 4:1 port configurations. |
||
| HOW TO ORDER | LP-SPL224 2.4GHz Indoor Splitter 2:1 N Female | ||
