|
|||
LanPro manufactures high performance CAT 5e cables for outdoor usage. The external jacket is made of Polyethylene (PE) with a high resistance to external agents like humidity, UV radiation and high temperatures resulting in a long lasting operation. The external jacket offers also positive protection to corrosion, erosion and friction.
This cable is constructed with 4 unshielded twisted pairs TP of AWG 24 100% Copper conductors, yielding an U/UTP structure. All of these features make this cable highly recommended for outdoor service between buildings or from post to premises.
The Figure 8 structural design, withstanding up to 100 m spans, due to a 1.2 mm Steel Messenger wire, relieves de cable from stresses of installation and deformation due to being hung between mast and building or building to building during its entire operating life.
Outdoor CAT 5e cables from LanPro are approved as per the ISO/IEC11801 standard and following the TIA/EIA 568-C.2 specifications for Category 5e cables.
Used for Gigabit Ethernet 1000BASE-Tx, token-ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, (broadband, analog baseband), digital video and voice over IP (VoIP), it can also be used for IP video surveillance cameras.
Warning: the use of traditional indoor grade Category 5e cable in outdoor pplications
subjects it to rapid deterioration. Installation of indoor CAT 5e cable inside a conduit does not make it outdoor suitable either. Conduits filled with water will deteriorate the cable rapidly. Therefore, choosing a high quality outdoor (UV-rated) CAT 5e cable with PE jacket and HDPE conductor insulation is extremely important. LanPro outdoor cables will avoid costly network outages, keeping network reliability high and maintenance costs low.
If the cable is not well made or UV-rated, it may snag when coming out of the box, causing an installation breakdown or failure in sunlight over time. Wi-Fi towers and their installations MUST use this kind of product to avoid fast deterioration of the cabling set-up due to weather, dust, sun and rude environment.
LanPro has taken each aspect into consideration when designing this product, from its storage, installation, operation and its maintenance in order to deliver a cost effective solution to our customers.
|
|||
FEATURES |
* With a Figure 8 structure, it withstands up to 100 m spans with a 1.2 mm Steel messenger wire that relieves de cable from stresses of installation and deformation due to being hanged between post or building to building premises.
* Exceeds all standards for CAT 5e communications cable. * Extremely durable. * Resistant to UV Rays. * Black PE Jacket. * For mast to building or building to building installation. * Characterized up to 100 MHz. * Operating voltage ≤ 48 Volt RMS. Applications: * Outdoor cable runs to wireless Access Points (AP), Bridges or CPE. * Outdoor cable runs to IP Video Surveillance Cameras. * Inter-building networks. * Ethernet, Phone, Paging, Alarm, Video and Power-over-Ethernet (PoE) Networks. * The perfect Cat 5e cable for outdoor residential and commercial installations. * Situations where reliability is of paramount importance, as in military complexes, hospitals, extreme weather locations, airports. |
||
HOW TO ORDER | LP-CE0N0BKC2 LanPro Reliable® CAT 5e U/UTP Fig 8 Outdoor Network Cable with 1.2 mm Solid Messenger wire for 100m span, Black PE Jacket with AWG 24 Solid Copper conductors, 1000 ft Wood Spool. | ||