|
|||
To achieve best performance of a Wireless LAN, the location of the Access Point (AP) must be carefully chosen. In most cases, finding a power supply for AP is a common obstacle. Power over Ethernet (PoE) technology provides the ideal power solution to help overcome these obstacles. In Ethernet, four pairs of Cat5 or Cat5e twisted pairs are used as the medium for transmission. The actual data transmission, however, only takes up two pairs of wires (pairs 1-2 and 3-6). PoE technology utilizes the remaining pairs (pairs 4-5 and 7-8) to conduct electricity. But not only AP devices take advantage of this compact technology. Also IP cameras and basically any kind of IP equipment may be subjet to be powered with this kind of technology if power consumption is under 16W. This unit has been throughfully tested on every thinkable situation getting second to none qualifications. This is an indoor device. It can be utilized to support voltage from 18V to 55V or comply with 802.3af standard by switch. |
|||
FEATURES |
* Input:100-240V AC 50/60Hz 0.4A. * Output: 48V 16W (Max). * Data: 1/2&3/6. * Power: 4/5+ & 7/8- (48V). * Data In: Connects PC/HUB/Switch. * Weight: 0.16kg. * Dimensions: 108mm x 74mm x 33mm. * Case of material: ABS UL94V-0. Ethernet Cable: * Data rate: 10/100Mbps * TIA/EIA 568 Cat5e * Connector: RJ-45. * Operating Temperature: 0°C to 40°C. * Storage Temperature: -40°C to 70°C. * Operating Humidity: 10% to 80% RH. * Storage Humidity: 5% to 90% RH. * CE FCC UL. |
||
HOW TO ORDER | LP-PoE150 Power Over Ethernet Injector | ||
|