LanPro Optical fiber to Serial Media Converter supports the mutual conversion of asynchronous RS-232, RS-422, RS-485 corresponding interface and Fiber. It is the best choice for controller connecting Remote Terminal Unit (RTU) to Host or  Supervisory Control and Data Acquisition (SCADA).

 

LanPro Optical fiber to Serial Media Converter supports the Asynchronous Serial Communication Protocol among RS-232.RS-422.RS-485, simultaneously it can be worked with two multi RS-232, RS-422 or RS-485 interface, which supports the working model of 2 wires (half duplex) and 4wires (full duplex) RS-485.

 

LanPro Optical fiber to Serial Media Converter with RS-485 supports the control of transmission of data (TXD or SD), hence which enhances the performance of various software, simplifies the way of control. LanPro Optical fiber to Serial Media Converter supports the connecting way of multi fiber with asynchronous serial interface; it supports two asynchronous serial interface through fiber to work with full duplex or half duplex.

 

The maximum transmission speed of RS-232 signal is 115.2 Kbps. The maximum transmission speed of RS-422/RS-485 is 460 Kbps. The different electrical interfaces can be used mutually together, for example, the RS-232 device can connect RS-422/RS-485 device. LanPro Optical fiber to Serial Media Converter can substitute the converter of RS-232/RS-485 interface or photoelectric isolator, providing the favorable performance of EMI/RFT.

* LanPro Optical fiber to Serial Media Converter for RS-232/RS-485/RS-422.

* Connector type: ST.

* Fiber Type: Multimode or Singlemode.

Benefits:

* “Point- to-Point” transmission.

* Extends RS-232/422/485 transmission up to:
  • 40 km with singlemode

  • 2 km with multimode.

* Decreases signal interference.

* Protects against electrical interference and chemical corrosion. Fiber do not get affected by sun, electrical or magnetic field, sparks, lighting, induction, radiation, etc.

* Can be installed wall mount or desktop.